Coal seam gas brine management in Queensland: the rules, the salt and the options

Home Coal seam gas brine management in Queensland: the rules, the salt and the options

Coal seam gas brine management in Queensland is a salt problem more than a water problem. Gas fields in the Surat and Bowen basins bring up about 54,000 ML of water a year, according to a CSIRO GISERA fact sheet published in August 2026. Most of that water is treated and put to use. What comes out of the reverse osmosis plants as brine has far fewer outlets, and the same fact sheet puts the industry’s lifetime total at about five million tonnes of solid salt.

This page sets out the Queensland rules that decide where CSG brine can go, how much there is, what the operators’ own plans say, and how encapsulation compares with salt recovery as of November 2026. Brine Consulting is an independent industrial water advisory firm in Amsterdam. Because we sell no treatment equipment, we have no stake in whether your salt is encapsulated, recovered or stored for longer; Queensland operators and developers bring us in remotely or through a defined engagement to test those choices alongside their own engineers and approvals team.

The rules: a 2012 policy, a ban on evaporation dams and a ten-year action plan

Three things frame CSG brine management in Queensland: a 2012 policy, the evaporation dam ban that comes with it, and a ten-year action plan for the salt. The department’s coal seam gas water page still lists the policy and the plan (checked 4 November 2026).

The Coal Seam Gas Water Management Policy 2012 (ESR/2016/2381, formerly EM738) sets two hierarchies, according to the department’s coal seam gas water page. For the water: first use it for a purpose that benefits the environment, water users or water-dependent industries; only then treat and dispose of it in a way that avoids, then minimises and mitigates, harm. For the saline waste: treat brine or salt residues into usable products where feasible; where that is not feasible, dispose of them to strict environmental standards.

Evaporation dams are banned for CSG water in all but exceptional circumstances. The department’s page states the ban and says existing evaporation dams must be converted to other uses or decommissioned. The Australian Government’s Bioregional Assessments summary of the 2012 policy adds the detail: evaporation dams were common practice until 2010, will not be approved for managing co-produced water except in exceptional circumstances, and are considered a reasonable disposal option only during exploration or production testing. The ban is a policy position applied through each project’s environmental authority (EA) under the Environmental Protection Act 1994, not a stand-alone statute. Brine is still held in dams, but these are storage dams built to the department’s guidelines for regulated structures, not a disposal route.

The Coal Seam Gas Brine Management Action Plan 2023 to 2033 (March 2023) is the state’s current plan for the salt. It names salt encapsulation, meaning crystallising the brine and placing the solid salt in a purpose-built facility, as the most feasible option at this stage. It classes non-toxic salts as category 2 regulated waste under the Environmental Protection Regulation 2019 and names waste disposal (ERA 60) as the most likely approval pathway. It also records that no end of waste code exists for brine, so any reuse trial would need its own end of waste approval. Its seven actions run from regular reporting of stored brine and salt volumes from 2023 to a review of the regulatory guidance on encapsulation approvals and five-yearly public reports on research.

How much brine and salt: the estimates have fallen by two thirds

The headline salt figure has moved a long way since the industry was approved, which matters for anyone sizing a facility or a market.

When Estimate Source
2008 forecast 15.4 million tonnes of salt over the industry’s life UQ independent review, February 2020, citing APPEA
2020 6.1 million tonnes of salt; 2,346 GL of water over the industry’s life; 14.7 GL of brine storage UQ independent review, February 2020, citing APPEA and DNRME
September 2022 36 brine dams, 20,811 ML of capacity, 67.24% in use Brine Management Action Plan, March 2023, from industry data
March 2023 About 5 million tonnes of solid salt Brine Management Action Plan, March 2023
August 2026 About 54,000 ML of water a year; about 5 million tonnes of salt over the life of the industry CSIRO GISERA fact sheet, August 2026

Two practical points follow. The September 2022 dam figure means roughly 14,000 ML of brine was sitting in storage while the encapsulation pathway was still being worked out. And the 2020 review’s lifetime numbers imply an average of about 2.6 kg of salt for every cubic metre of water produced (6.1 million tonnes over 2,346 GL), a useful check when an individual field reports its own figures.

What the operators’ own documents say

Each of the four large producers publishes water and salt plans. These are company documents, written by the operators for their regulators, and they differ in how much they disclose.

Operator What its published plan says
Australia Pacific LNG (Origin-operated) Its Spring Gully CSG Water Management Plan, version 8 (November 2022) describes a 12 ML/d water treatment facility running at about 80% recovery; with 85% availability, its water balance models 10.2 ML/d treated and about 2.04 ML/d of brine. It expects about 400,000 tonnes of salt over the project’s life. Encapsulation is ranked first as the long-term strategy, with brine piped to Reedy Creek for crystallisation, subject to approvals.
Shell QGC Its water treatment page says its plants recover 97% of CSG water for beneficial use and that the remaining 3%, concentrated brine, is stored in purpose-built ponds. The 2020 UQ review expected QGC’s first salt encapsulation facility in the mid-2020s.
Santos GLNG Its CSG Waste Management Plan (September 2025) lists reverse osmosis desalination at Arcadia, Roma and Fairview and states that commercial salt recovery is not considered feasible because of energy intensity, cost and low commercial salt volumes. The base case is disposal, with transfer to a licensed waste facility.
Arrow Energy Its CSG Water and Salt Management Strategy (uploaded July 2025) expects about 4.5 tonnes of salt per megalitre of CSG water, assuming the average salt concentration of 4,500 mg/L seen in its Surat Basin operations. It reports selective salt precipitation trials and work on salt and soda ash, rules out brine injection for now because no suitable formation has been found, and treats landfill as not preferred.

The spread is the useful part. One operator ranks encapsulation first, another rules out commercial salt recovery, a third is still trialling recovery. Per-operator lifetime salt totals are not published in a comparable form, so treat any industry-wide split by company with caution.

Worked example: the salt from one treatment plant (hypothetical)

This example shows the arithmetic that sits behind a brine plan. It combines published figures from two different operators, so it describes no real plant.

Assumptions:

  • a treatment plant the size of Spring Gully, treating 10.2 ML/d after availability, at 80% recovery (APLNG plan above);

  • feed water at 4,500 mg/L of salt, the average Arrow assumes for its Surat Basin operations;

  • the reverse osmosis membranes reject almost all of the salt.

Results:

  • Salt in: 10.2 ML/d × 4.5 t/ML = about 46 tonnes a day, or about 16,750 tonnes a year.

  • Brine out: 2.04 ML/d, about 745 ML a year, at about 22,500 mg/L (46 tonnes in 2.04 ML).

  • A 400 ML brine dam would take this flow for about 196 days before evaporation is counted.

  • About 400,000 tonnes of salt, the life-of-project figure in the Spring Gully plan, would take about 24 years to accumulate at this rate.

The same arithmetic at industry scale gives a ceiling, not a forecast. If all 54,000 ML a year were desalinated at 4,500 mg/L, the salt would be about 243,000 tonnes a year, and five million tonnes would build up in about 21 years. The real annual figure is lower, because not all CSG water is desalinated and salinity varies by field. Test your own field data with our brine mass balance calculator and brine concentration factor calculator, after checking the analyses with the Water Analysis Validator.

Should CSG brine be encapsulated or turned into products?

CSG brine is mostly sodium with chloride and bicarbonate or carbonate, and its chemistry varies sharply across the two basins, according to the CSIRO GISERA fact sheet. That chemistry decides both routes.

Encapsulation means evaporating or crystallising the brine to a solid and placing it in an engineered, lined and capped cell. CSIRO’s 2026 fact sheet calls it “the most feasible and defensible current option” for industry-wide use, because it handles variable brine, uses established technology and fits the current regulatory framework. It also says encapsulation carries strict, long-term stewardship obligations: site selection that protects land and groundwater, secure lining and capping, and ongoing monitoring. The action plan expected waste facilities would not be needed until around 2030. Local acceptance is not settled: a University of Queensland focus-group study of Surat Basin landholders found views split for and against encapsulation (Witt, Dev and Kambo, Australian Energy Producers Journal, May 2025).

Salt recovery turns the brine into products such as sodium chloride, soda ash, caustic soda or lime. The action plan, drawing on an APPEA report, found selective salt recovery technically feasible but not suitable for industry-wide adoption, citing energy use, chemical use, transport, certainty and markets. The 2020 UQ review records that industry had spent about $60 million evaluating it. The newest attempt is commercial: on 20 August 2026, Parkway Corporate told the ASX that Western Downs Regional Council had approved the development application for its QBS Brine Management Complex about 20 km south of Chinchilla, including an environmental authority through the State Assessment and Referral Agency (Parkway announcement). This is a company announcement, not an independent assessment. It describes a first stage at one tenth of commercial scale, a commercial Stage 1 of about 75,000 tonnes of contained salts a year, and no confirmed brine supplier. For scale, 75,000 tonnes is about 31% of the 243,000-tonne ceiling in the worked example above.

In our view, the choice for a plant team is less “encapsulate or recover” than “what can each salt fraction do”. A recovery process that takes out sodium carbonate or sodium chloride still leaves a residue for a regulated facility, so we expect most workable plans to combine both. Our guides on salt recovery from brine, mixed salt disposal in ZLD and the valorization hierarchy explain how to test each fraction.

The other options, and where they stand in Queensland

Option Status for CSG brine (as of November 2026) Source
Evaporation dams as disposal Banned in all but exceptional circumstances; only for exploration or production testing 2012 policy, department page
Regulated brine storage dams In use as interim storage; 36 dams in September 2022 Action plan, March 2023
Encapsulation of solid salt Preferred current option; ERA 60 the likely approval pathway Action plan 2023; CSIRO 2026
Selective salt recovery Technically feasible, not adopted industry-wide; one commercial complex approved in August 2026 Action plan 2023; Parkway, August 2026
Deep well injection of brine No suitable formation identified by Arrow; rated less suitable for Queensland by CSIRO Arrow strategy; CSIRO 2026
Ocean outfall Arrow considers it feasible for some areas, subject to design; CSIRO rates it less suitable Arrow strategy; CSIRO 2026

Injection of treated water is a different matter. APLNG’s Spring Gully plan describes injecting treated water into the Precipice Sandstone, which is a beneficial use of permeate, not a brine route. Our pages on deep well injection and brine disposal options compared cover the general cases.

Groundwater: the Underground Water Impact Report

Brine volume starts with the water taken out of the coal seams, and that is regulated through the Office of Groundwater Impact Assessment (OGIA). Its Surat Cumulative Management Area page puts CSG production wells at about 9,000, with about 22,000 expected at peak development around 2030 (page last updated October 2023).

The approved report is the Surat Underground Water Impact Report 2021, approved on 28 March 2022, in effect from 1 May 2022, and amended with an addendum approved on 22 May 2025 (OGIA publications). OGIA released a consultation draft of the UWIR 2025, amended it on 10 November 2025, and closed submissions in November 2025; its site still shows the draft awaiting approval by the Department of the Environment, Tourism, Science and Innovation (checked 4 November 2026). AgForce’s submission on the draft reports that it predicts 747 water bores affected in the long term, 7% more than in 2021 (AgForce, November 2025). For brine planning, the point is that well numbers and water forecasts in the final UWIR 2025 will feed straight into the salt each operator has to place.

Testing a brine plan before it is committed

For CSG brine management in Queensland, the research is good and mostly public. The harder part is turning it into numbers for one field: how much salt, of what chemistry, arriving when, and at what cost to place. That is the work we take on:

  • reconciling field water forecasts, brine dam inventories and salt tonnages into one balance that matches your EA reporting;

  • testing a recovery offer, such as a sodium carbonate or sodium chloride product, against the actual brine chemistry and the residue it leaves;

  • comparing encapsulation, recovery and storage options on cost, energy and long-term liability, using the same assumptions for each;

  • checking crystalliser, evaporator and brine concentrator proposals against the field’s own brine chemistry and storage inventory.

See our brine resource recovery and advisory and due diligence services. Coal mine water in the same region is covered on our Queensland mine water treatment page, and desalination and inland brine elsewhere in the country on brine management in Australia. Our Australia page covers other industrial sites.

Short answers on CSG brine

Is CSG brine like seawater desalination brine? No. It is mostly sodium with chloride and bicarbonate or carbonate, which is why soda ash keeps appearing in recovery studies, and its composition changes between operators, sites and with time in storage.

Who approves a salt disposal or recovery facility? Facilities need an environmental authority under the Environmental Protection Act 1994; the action plan names waste disposal (ERA 60) as the likely pathway for encapsulation, and Parkway’s 2026 approvals came through the local council and the State Assessment and Referral Agency. Your own EA conditions govern how brine is stored and reported until then.

Has the salt estimate stopped falling? The figure has held at about five million tonnes from the 2023 action plan to CSIRO’s 2026 fact sheet. The final UWIR 2025 and updated field forecasts are the next things to watch.

Bringing a CSG brine question to us

A first call is most useful with your brine dam inventory, a recent brine analysis and the decision in front of you, whether that is a recovery partner’s offer, an encapsulation cell or more storage. Book a scoping call or send us your project details.

Written by the Brine Consulting advisory team. The Brine Consulting advisory practice includes Steve Coffee (Part Time Consultant) and Paolo Mattiuzza (Executive Advisor – Brine Management & ZLD Systems). A senior produced water expert and global oil and gas advisor, Steve brings more than 30 years of experience in produced water treatment, hydrocyclones, sand management, water reuse, and upstream system optimization. A senior brine management and ZLD specialist, Paolo brings more than 20 years of international experience in environmental technologies, industrial water treatment, and resource recovery. Meet our experts.

Questions about your site's water or brine?

Tell us briefly what you are working on and one of our experts will get back to you.