Zero liquid discharge consultant for US sites: the state rules compared

Home Zero liquid discharge consultant for US sites: the state rules compared

If you are looking for a zero liquid discharge consultant in the USA, the useful first question is not which evaporator to buy. It is which outlet your state still leaves open for the salt. The answer differs between a Gulf Coast chemical plant, a Phoenix fab, a Central Valley food plant and a Permian water midstream company, and in most cases it decides whether you need full ZLD, a smaller concentrate stream, or neither.

Brine Consulting is an independent industrial water advisory firm in Amsterdam. We sell no treatment equipment, so we can rank your outlets before anyone prices a crystallizer without a sale depending on the result. We have no US office: we work with US sites remotely or through a defined engagement, and permits and agency contact stay with your state permitting engineers.

This page compares the states we cover, sets out the federal rules that sit under all of them, and points you to the page for your situation.

The states compared

What changes from state to state is which outlets stay open for the salt. Status at 4 November 2026. Each state page has the detail and the sources; check the dates there before relying on a row.

Where Main issue Discharge and disposal routes, with the rules that matter What to check first
Texas industrial plants High-TDS process wastewater, with Gulf Coast water supply under pressure TPDES permit from TCEQ, set against the federal effluent guideline and the 2022 Texas Surface Water Quality Standards (state rule since September 2022); city pretreatment; Class I wells under 30 TAC Chapter 331; reuse under 30 TAC Chapter 210, Subchapter E, in effect since December 2002 Whether the stream can be recycled within the plant, which needs no Subchapter E authorization, and whether a Class I well is within reach
Permian Basin, Texas side Produced water volumes against shrinking disposal room Railroad Commission disposal wells, with stricter Permian permitting since 1 June 2025; TCEQ discharge permits, none issued for treated produced water as of late August 2026; land application permitting moved to TCEQ for applications filed from 1 September 2025, with TCEQ’s implementing rule adopted (agenda item 60, 4 November 2026; effective after Texas Register publication) Which outlet has a permit path today, and where the desalination concentrate will go
New Mexico Produced water reuse outside the oilfield Since 12 July 2025, 20.6.8 NMAC prohibits discharging treated or untreated produced water for activities unrelated to oil and gas; only non-discharging pilots under an NMED permit of up to five years; petition WQCC 26-18 sent to a hearing on 12 May 2026, with no hearing date set Whether the project can run as a non-discharging pilot, and whether its data will hold up when the rule is reopened
Arizona fabs Concentrate from fab water reclaim, with no ocean outfall City pretreatment permits for the sewer; evaporation ponds need an Aquifer Protection Permit unless exempt; ADEQ has run Underground Injection Control for well Classes I to VI since 15 October 2025, except on Indian lands; Advanced Water Purification rules in effect since 4 March 2025 Which outlet is available for the residual, in writing, and what your city’s AWP source control will ask of your discharge
California Where reuse concentrate can go depends on the region City sewer to coastal treatment plants with ocean outfalls; SAWPA’s Inland Empire Brine Line; the Central Valley Water Board’s Salt Control Program; Class I wells permitted by EPA Region 9. The Ocean Plan brine limit (2019 edition) covers seawater desalination, not industrial concentrate Whether the site is coastal, in the Inland Empire or in the Central Valley
Smackover, Arkansas and East Texas Lithium brine projects that lift and reinject large brine volumes Lithium-depleted brine returned to the formation through injection wells; the Arkansas Oil and Gas Commission set the first brine unit, royalty and integration terms in 2025; in Texas, royalty and ownership questions for lithium in brine remain open Injection capacity over time, and whether the tail brine is compatible with the formation

Read across the rows and one pattern repeats. No state on this list requires zero liquid discharge as a general rule. ZLD becomes the answer where the outlets close: no sewer that will take the salt, no well the geology allows, no permit path for a discharge. That is why we rank the outlets before anyone prices a crystallizer.

The federal rules under every state

State agencies issue most of the permits, but five federal programmes set the frame.

  • Direct discharge. A discharge to a river, lake or the sea needs a Clean Water Act NPDES permit, issued for no more than five years (EPA). Texas issues them as TPDES permits through TCEQ. Limits start from the federal effluent guideline for your industry, such as 40 CFR Part 414 for organic chemicals, Part 419 for petroleum refining or Part 469 for semiconductors, and the state water quality standards for the receiving water come on top.

  • Sewer discharge. A discharge to a city sewer needs no NPDES permit, but the city may set its own permit requirements. Under the National Pretreatment Program, EPA and authorized states approve local municipalities to carry out permitting, administration and enforcement for discharges to their treatment plants (EPA, updated 31 August 2026). The categorical standards apply the federal guideline to indirect dischargers, and the city adds its local limits.

  • Underground injection. Class I wells take industrial and municipal waste under the Safe Drinking Water Act. According to EPA’s Class I page (archived January 2025), the US has about 800 operating Class I wells, roughly 53% of them taking non-hazardous industrial waste, injecting typically 1,700 to more than 10,000 feet down (EPA). The permitting agency differs by state: TCEQ in Texas, ADEQ in Arizona since 15 October 2025, and EPA Region 9 in California. Class II wells are used only for fluids associated with oil and gas production, and EPA counts about 180,000 of them in operation (EPA, updated 3 June 2026). Oilfield disposal wells are regulated by the Railroad Commission in Texas and the Oil Conservation Division in New Mexico; in California, the state agency CalGEM holds primacy for Class II.

  • Steam electric power plants. A coal-fired plant that will keep burning coal beyond 2034 must stop discharging flue gas desulfurization (FGD) wastewater by a date its permitting authority sets, and no later than 31 December 2034. The 2024 supplemental rule, published on 9 May 2024, set the zero-discharge requirement with a 2029 deadline. The Deadline Extensions Rule, published on 31 December 2025 and in force since 2 March 2026, moved the date to 2034 and did not change the requirement itself (EPA). A proposed rule of 18 May 2026 covers unmanaged combustion residual leachate only. Our page on FGD wastewater ZLD covers the deadlines and technology basis.

  • Oil and gas produced water. Under 40 CFR Part 435 Subpart E, onshore facilities west of the 98th meridian may discharge produced water only when it is used for agriculture or wildlife propagation. EPA announced on 12 March 2025 that it will revise Subpart E; no proposed rule appeared on its effluent guidelines page as of the 2 June 2026 update (EPA). Until a proposal is published, the current rule applies.

So the only federal zero-discharge requirement in this list is the one for FGD wastewater at coal plants. Everywhere else, the federal rules set limits for each outlet and leave the choice of outlet to you and your state. Our comparison of brine discharge regulations by region puts the US alongside Europe, the Gulf, Chile and others.

Which US page fits your situation

Industrial sites

  • A chemical plant, refinery or other industrial site in Texas with a high-TDS stream: start with Texas, which tests the outfall, the sewer, a Class I well and reuse in turn and shows why Gulf Coast water supply now matters.

  • A California plant deciding between buying recycled water and recycling its own: California shows where the concentrate can go on the coast, in the Inland Empire and in the Central Valley.

  • A semiconductor fab in the Phoenix area raising water recovery: Arizona semiconductor ZLD covers the outlets for fab concentrate and how AWP source control affects the sewer route.

Oil, gas and lithium brine

  • A Permian operator, water midstream company or investor weighing desalination against disposal: Permian produced water compares the Texas and New Mexico outlets and shows what desalination leaves behind.

  • A New Mexico operator or technology developer planning a pilot: New Mexico produced water reuse covers what 20.6.8 NMAC allows and how to design pilot data for the coming hearing.

  • An owner, lender or partner in an Arkansas or East Texas lithium brine project: Smackover lithium brine sets out one project’s brine balance, the reinjection questions and how Arkansas set its terms in 2025.

Topics that run across states

  • Cooling tower blowdown ZLD, with a section on Texas sites.

  • FGD wastewater ZLD for coal plants under the steam electric rules.

  • Industrial reverse osmosis systems: what they cost over ten years and how to make supplier quotes comparable.

  • Direct potable reuse versus industrial reuse: how potable reuse in Texas and California changes what the sewer will accept and who competes for reclaimed water.

Across the border

If you also run plants in Mexico, our Mexico page explains why NOM-001-SEMARNAT-2021 sets no limit for dissolved salts but switches the organic test from COD to TOC once chloride reaches 1,000 mg/L, and what that means for a plant that concentrates its wastewater.

How we work with US sites

Independent input is most useful at one of three points: a stream without a settled outlet, a vendor offer for ZLD that nobody on site can check, or a lender or buyer who needs an independent view of a water plant. The work is the same each time, and it starts at the disposal end and works back (our ZLD guide explains why the disposal endpoint comes first). We check the water analysis and site water balance that every design will rest on, rank the outlets your state allows with the salt load followed through to the end, put minimal liquid discharge and full ZLD on one basis, and review offers line by line, including exclusions and guarantees.

Two free tools help before a call: the MLD vs ZLD screener and the Water Analysis Validator. If you already hold a proposal, start with our ZLD vendor proposal checklist. The services behind this work are water treatment and ZLD consulting, water reuse and ZLD systems and advisory and due diligence. For regions outside the US, including Brazil, see where we work.

What if your state is not listed?

The federal programmes above apply in every state, and the method does not change: check the water analysis, find the outlets your state allows, and follow the salt to its end point. For the state rules themselves we work alongside your local permitting engineer. Tell us the state and the stream when you get in touch.

Start with the outlet

Tell us the state, the stream and the outlet you are relying on today. A scoping call is usually enough to see whether that outlet holds and whether full ZLD belongs in the conversation at all. Book a scoping call, send us your project details or write to christos@brineconsulting.com.

Written by the Brine Consulting advisory team. The Brine Consulting advisory practice includes Steve Coffee, Part Time Consultant, a senior produced water expert and global oil and gas advisor with more than 30 years of experience supporting innovation, optimization, and technology deployment across upstream water management, and Paolo Mattiuzza, Executive Advisor, Brine Management & ZLD Systems, a senior brine management and ZLD specialist with more than 20 years of international experience in environmental technologies, industrial water treatment, and resource recovery. Meet our experts.

Questions about your site's water or brine?

Tell us briefly what you are working on and one of our experts will get back to you.